Overview of Design Examples of AC-DC Non-isolated Buck Converters


Points of this article

・The design of non-isolated AC-DC converters is described.

・An example circuit known as a diode-rectified or asynchronous-rectified buck converter is considered.

In this chapter, as our second installment in the series on AC-DC converter design, we take up design examples of non-isolated buck converters. In the series on the design of AC-DC converters, we previously, under the title “Design Method of PWM AC-DC Flyback Converters“, explained design of AC-DC converters with an isolated flyback design. In this chapter, we shall analyze the circuit operation and design examples of AC-DC step-down converters that do not use a transformer.

Of course, AC-DC converters are not all isolated-type devices. In fact, there are numerous applications that do not require isolation, and by dispensing with the transformer, there are advantages in size, weight, and cost. We begin by considering a circuit example that is easy to visualize. This is a step-down converter generally known as a “buck” converter, and is also called a diode rectifier or asynchronous rectifier. Conceptually, it is the same as a DC-DC buck converter.

Here we also give an overview of this chapter. We first review the basic operation of buck converters, and will be using the above circuit example in explanations ranging from the method of component selection to layout design.

【Download Documents】Basic of AC-DC Conversion

Basic studies to understand AC-DC converters and to go designing.